User Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
user:product:dual-vision_recording:dual-vision_xc4:troubleshooting:in-sd [2018/10/09 19:36]
boh@roscovision.com
user:product:dual-vision_recording:dual-vision_xc4:troubleshooting:in-sd [2019/03/12 19:02] (current)
boh@roscovision.com
Line 1: Line 1:
 ====== Invalid SD Card Error (IN_SD) ====== ====== Invalid SD Card Error (IN_SD) ======
- 
 ==== Error Code ==== ==== Error Code ====
 In_SD\\ In_SD\\
Line 9: Line 8:
 ==== Description ==== ==== Description ====
  
-Camera display “INSD” constantly.+Camera display “IN_SD” constantly.
  
 ==== Potential Possibilities ==== ==== Potential Possibilities ====
-SD card got swapped.+  * SD card was swapped.  
 +  * PDC box was swapped. ​
  
-==== Diagonosis ​Process ==== +==== Diagnosis ​Process ==== 
-=== step 1 === +=== Step 1 === 
-Remove the SD card from the camera. +Remove the SD card from the camera(For details please refer to {{ :​user:​product:​dual-vision_recording:​dual-vision_xc4:​installation_guide:​sd_card_installation_v3.pdf |SD Card Installation & Removal}}.\\ \\ 
-=== step 2 ===+=== Step 2 === 
 +Check the labels on both the SD card and the camera and verify if the vehicle names are consistent. If it's consistent, it's the PDC box got swapped. If not, it's most likely the SD card got swapped.\\ \\ 
 +=== Step 3 === 
 +Look for the designated vehicle that matches the label on SD card, then remove the SD card from that camera also.\\ \\ 
 +=== Step 4 === 
 +Please see [[user:​product:​dual-vision_recording:​dual-vision_xc4:​troubleshooting:​solution:​format_sd_card|Format SD Card]]. 
 +===Step 6 === 
 +Put the SD cards back to its designated camera and reboot the camera. \\ \\
  
  
 +If the issue still persists after trying all steps above, please [[:​contact_us|Contact Us]].