User Tools


Card/Tag Reader

The card/tag reader is a device that allows event and vehicle data to be categorized by driver names through a swipe of a card/tag.

To have a better understanding on the card/tag reader’s application to the DVXC4 setup, please download the user manual.
The card/tag reader that used to register swipes is below:

Two items that can be used to register with the reader is a card or tag.

Card

Tag

To properly install this device, please download the PDF below.

Installation Guide

To understand the RoscoLive implications on how it relates to the card/tag reader, then please visit RoscoLive Drivers Page

1. Turn on the vehicle.

2. Wait until the camera fully boots up showing the time and “REC” on the LCD screen on the camera head.

3. Swipe the card/tag on the top surface of the reader. If you hear a beep, then the reader took the card/tag.

4. Verify that the LCD screen say “:1d” for ID. This is verification that the DVXC has registered the ID.


Home